At the end of automatic priming, it is possible to continue the priming using the semi-automatic
priming function as defined below.
Semi-automatic priming
Press
key to access to the priming modes. Press
key to launch the priming.
Keep it depressed during priming. Release it once priming is complete.
Press
to go back to setting screen.
WARNING
At the end of priming, check that the set is correctly primed.
4.2.3.2 Priming without the pump (Manual priming)
1.
Remove the giving set from the pump (see
Removing/Changing the giving set from the
on page 24).
2.
Close Pinch clamp.
3.
Connect food container to giving set and hang up.
4.
Fill drip chamber half full by pressing gently.
5.
Open Pinch clamp and prime to the end of the giving set.
6.
Close Pinch clamp.
Install the set in the pump to start feeding (see
on page 17).
21
