Fresco Pro FFC1A-03H, Manual

Page: 79 / 83

FCAC-KTSM-2008-12 Wireless remote controller R51/E
Control 77
3.
SWING Button: Push this switch button to change the louver angle.
4.
RESET Button: When the RESET button is pushed, all of the current settings are cancelled and the
control will return to the initial settings.
5. ECONOMIC RUNNING Button: Push this button to go into the Energy-Saving operation mode.
6. LOCK Button: Push this button to lock in all the current settings. To release settings, push again.
7. CANCEL Button: Push this button to cancel the TIMER settings.
8. TIMER Button: This button is used to preset the time ON (start to operate) and the time OFF (turn off
the operation)
9. ON/OFF Button: Push this button to start the unit operation. Push the button again to stop the unit
operation.
10. FAN SPEED Button: This button is used for setting fan speed in the sequence that goes from AUTO,
LOW, MED to HIGH, and then back to Auto.
11. TEMP UP Button: Push this button to increase the indoor temperature setting or to adjust the timer in a
counter-clockwise direction.
12.
VENT Button: Push this button to set the ventilating mode. The ventilating mode will operate in the
following sequence: