90PF
Section 3
Dual Channel Programmable
Remote Operation
Filter/Amplifier Card
3.1 - Instructions:
1. Insert
the
CDFC-01,
CD into the PC, CDROM.
Using Microsoft Explorer, select the
Instrument Control Directory
and
“CLICK”
setup.
2. Follow instructions and the software will place
an icon on your desktop and in your Program
startup menu.
3. Connect the appropriate cable RS232 or GPIB
to the PC’s interface card and the 90IP.
4.
“DOUBLE CLICK”
on the 90IP icon and the
instrument controller set up Graphical User
Interface (GUI) will appear.
5. Select GPIB or RS232. For RS232, select the
COM port (1 or 2) location where the RS232
interface card is installed in your PC.
6.
“CLICK”
on
SCAN,
this will display an
instrument list.
“CLICK”
or highlight the
desired chassis, this will display an instrument
list of slot cards installed in the 90IP chassis.
7.
“CLICK”
or highlight a slot card, this will launch
the slot card GUI onto the PC screen, allowing set-
up of each channel configuration on the slot card. At
power down, the GUI will show the last used settings
of the slot card.
See
Figure 2
and read
Section 2.4
for a detailed
description of the above commands.
To
Reactivate the Soft Front Panel
after shut down, steps four (4) through seven (7) of the above procedure
must be performed.
8
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected]
•
Web Address: http://www.freqdev.com
