90PF Slot Card
Section 1
Dual Channel Programmable
Front Panel Operation
Filter/Amplifier Card
1.1 - Start Up
All 90PF slot cards should be inserted into the 90IP chassis and controller while the power switch (rear panel) is in the
OFF
position (O). Once slot cards have been inserted, the power switch can be moved to the
ON
position (I). Upon
power-up, a micro-controller on each 90PF slot card sends its configuration to the 90IP controller which displays the
90PF configuration. This is Frequency Devices’
smartSLOT Technology
. See 90IP Operations Manual for chassis
and controller operating instructions.
See
Figure 1
- Front Panel below
Figure 1 – Front Panel
1.2 - 90 PF Operation Instructions
1. Upon power up, a cursor appears under the default function value or mode. (Note the cursor is initially displayed
on the LSB of any numerical value.)
2. Turning
the
FUNCTION
knob scrolls the cursor through the various function selections.
3. To make a change, press the
ENTER
button and the addressed character will blink.
4. Turning
the
SELECT
knob will alter the value of the desired character or mode.
5. Pressing
the
ENTER
button again, loads the selected value or configuration into the slot card and controller
memory and the blinking stops.
6. If a question mark (?) appears in the display, an invalid entry has been made and that value or mode must be
corrected.
Example:
Frequency values outside permitted tuning ranges.
7. After a valid change is accepted by pressing the
ENTER
key, another function value or mode may be selected by
using the
FUNCTION
and
SELECT
knobs.
8. Once the channel is programmed or configured, it may also be saved in one of the nine configuration locations.
Since it is the most recent configuration setting, it automatically becomes the new power-up default for that
channel.
9.
User must press ENTER button to select and activate all configurations. This is done on a per channel
basis.
2
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected]
•
Web Address: http://www.freqdev.com
