90PF
Section 2
Dual Channel Programmable
Software Installation
Filter/Amplifier Card
7
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected]
•
Web Address: http://www.freqdev.com
hear relays clicking for certain button changes in I/O). When finished, use the Quit button to exit the
application. Using RS232 remote operation, after quitting a remote session, press the ENTER button on the
90IP to return to local mode or turn the power button off and on, to reset the instrument.
For GPIB remote operation: Connect a GPIB cable from the instrument to the PC, and turn ON (I) the 90IP.
Initiate the 90IP Instrument Control from the desktop icon: Select GPIB then CLICK on the Scan button:
GPIB0::1::INSTR should appear in the “Instruments” display window. CLICK on items as they appear in the
windows until the 90PF GUI appears. Verify that control of the PF card is functional. Use the Quit button to
exit application.
2.3 - Uninstall
Executing setup toggles between install and uninstall. To uninstall all the 90IP related software from the target PC,
you may use the
CDFC-01
disk. Uninstall is initiated from CD setup folders. Each time this is done, the software
toggles between install and uninstall. However, even though the NI libraries auto setup, they do not uninstall
automatically. The NI libraries must be uninstalled separately using Add/Remove Programs in Control Panel. The list
is as follows, NI IVI engine 1.83, NI-MAX 2.2.0, NI-488.2 1.70, NI VISA 2.6 Run-time Engine, and NI-VISA Server
1.0.0f6.
