freightliner PX113064S T 2016, Manual

Page: 138 / 236

vehicle off the road to a safe location, turning the
keyswitch to the off position, and a call for service.
If a combustible gas detection system LED has
illuminated or a high-voltage battery thermal event
warning has appeared, exit the cab and call
emergency services. For more information, see
Chapter 19.
High-Voltage Battery Thermal Event
Warning
If a thermal event is detected inside a high-voltage
battery when the vehicle is on, the following things
will happen:
•
The red high-voltage battery thermal event
telltale, shown in
Fig. 10.33, appears in the
dynamic telltale section of the driver display.
•
A red warning message, shown in Fig. 10.34,
appears in the center of the driver display
screen.
In response the driver should bring the vehicle to a
safe stop, apply the park brake, turn the keyswitch to
off, hit the eStop button, and exit the cab within five
minutes. Once in a safe location, call emergency
services.
For more information on this system, see
Chapter 19.
Combustible Gas Detection System
If the explosive gas detection system sensors detects
a 50 percent concentration of the lower explosive
limit for a gas and maintains that level for six
continuous seconds, a red LED on the system panel
illuminates and an alarm sounds.
If a red LED illuminates when driving, quickly bring
the vehicle to a safe stop. Apply the park brake, turn
off the ignition, and press the eStop button on the
dash prior to exiting the cab. Immediately call
emergency services.
For more information on the combustible gas
detection system, see
Chapter 19.
f612086 07/01/2022
Fig. 10.31, High Voltage Battery Caution
f612087 07/01/2022
Fig. 10.32, High Voltage Battery Warning
f612179 07/29/2022
Fig. 10.33, High-Voltage Battery Failure Telltale
f611989 06/30/2022
Fig. 10.34, Thermal Event Warning Message
Vehicle Charging, Operation, and Shutdown
10.15