3
Assembly Instructions
Important Notes:
The pre-assembly involves bolting the hinges to the panels. The process is simple, however
some organization is helpful. Each of the six panels in the fairing are different. The font, middle
and rear panels all have a left and right side as illustrated below. This is so that the natural curve
in the TPO plastic material faces inward toward the center of the trailer.
The panels are marked in the middle of the top edge with L, LM or LR for left front, left middle and
left rear or R, RM, RR for right front, right middle and right rear. The mark is routed all the way
through the panels so that it is visible on both sides. The lettering will appear backwards when
read from the side of the panel that faces out from the trailer (this side of the mark will be covered
by the top hinge when installed so that it is not visible). The marks read correctly from the inside
of the panels as illustrated below.
Inside of left front panel Inside of right rear panel
