4
It is also important to note that that middle and rear panels are slightly longer than the hinge so
that they can overlap when mounted on the trailer. Therefore the hinge will not extend over the
last slotted hole on the side of the panel with slotted holes along its edge as illustrated below on a
middle panel.
Also note that on the middle and front panels, it is not necessary to place one bolt in the hinge on
the side above the round holes as illustrated above. This bolt is placed during installation on the
trailer because the panels overlap.
If you are installing several units, it can help to identify the panels and organize them into six piles
for each panel type before getting started.
