5
Step 1: Barrier Tape the Hinges
When mounting the faring on trailers with steel cross members (typically dry vans), place
separation tape on the aluminum hinges to create a barrier that will separate the metals to
prevent corrosion. This step is not necessary when mounting on trailers with aluminum cross
members (typically reefers). Any corrosion barrier tape will work for this step, and 2
” wide clear
packing tape (polypropylene) can also be used and is a perfect width (preferably heavy duty
packing tape that is thicker than standard tape).
1a. Gather 6 long hinges and place them closed on the table with the plain side (no fastener
holes) facing up.
1b.
Place tape (2” wide clear packing tape) across each hinge so that the tape is flush with the
side edge of the hinge that is not pinned. Use a razor to cut the tape flush with either end.
When done with all 6 hinges place them aside. (It is useful to have a tape applicator if taping
multiple units).
