Freiberg
Instruments
GmbH
ּ Am St. Niclas Schacht 13 ּ 09599 Freiberg – Germany
34 / 78
EMCCD camera
spectrometer
When hover with the mouse above an icon a description of the according symbol appears.
3.3.
Connection and Initialization
Before any operation with the
lexsyg
measurement system can be started, it is necessary to
connect and initialize the system. The First step is to power the measurement system and
press the
on/off
button (see Figure 2). Now click the
connection
button (see section 3.2).
The caption of the button will
change to “connected” and the color will switch to green. If not,
proceed at section 3.6.1.
After connection, the measurement system must be initialized. Click the
first aid
button and
in the appearing window the button
Reset Lexsyg and initialize new
– 1). The
button changes its color to red and in the
Application status
button the caption switches to
“resetting and initializing” After the initialization, the button changes its color back to grey and
the
connection
button is labeled
“start measurements”.
The system is now ready for processing tasks.
3.4.
Typical workflow
– making a measurement
The work with the
lexsyg
measurement system consists of a number of standard tasks
repeated in constant order. The following section describes a typical workflow which will be
aligned by a customer but show a good first workflow to get acquainted with the
measurement system.
3.4.1.
Load and unload a sample
An important task concerning the work with the
lexsyg
measurement system is to load or
unload sample discs. It is the only task in which the user must interact with the hardware unit.
All other tasks will only be executed with the
Lexsyg Studio
software.
Loading and Unloading sample discs is only possible while the system is initialized and idle,
which means no measurement is actual running.
