Freiberg
Instruments
GmbH
ּ Am St. Niclas Schacht 13 ּ 09599 Freiberg – Germany
12 / 78
1.2.7.
Electricity
The
lexsyg
equipment runs with 110V/230 V AC, 50/60 Hz. Internal low tension in the range
of +/-5 to +/-48 V DC is used.
For the connection with the main supply a grounding conductor is necessary (DIN VDE 0100-
410 (IEC 60364-4-41)).
Observe the local regulations! Electrical circuit points should be periodically checked (DIN
EN 0105, DIN EN 0702, BGV A2).
1.2.8.
Mechanics
Inappropriate operation can cause damage of property and injuries.
Use the equipment only for compulsory measuring!
External tensions and vibrations should not be applied to the equipment!
For a better cooling of the equipment don’t place any other hardware at intervals of 20 cm.
1.2.9.
Hazardous Materials
An assignment of hazardous materials is not intended.
1.2.10.
High Temperatures
The equipment can be warmed up by electrical lost heat. It’s not allowed to excess a
temperature of 40 °C!
