8
TABELLA DELLA DURATA DEI PROGRAMMI
• DETERGENT
DRAWER:
I
Prewash
II
Washing
Softener
Bleach
WASHING GUIDE
• CONTROL
PANEL:
A
Wash Phases LED
B
Delayed Start Button
C
Spin button
D
Prewash button
E
Turbo button
F
Rinse button
G
Anti-crease button
H
Start/pause button
I
Program setting knob
S
Spin speed LEDS
T
Delayed Start LEDS
WASH IN THE CORRECT WAY
Before attempting to operate the washing machine, ensure that the installation has been performed correctly, as described
in the instruction booklet.
• DAILY
USE
1.
Before putting clothes in the washing machine, empty the pockets of any hard or sharp object (nails, screws, coins,
pins and stones) that may damage the machine and garments.
2.
Open the top of the washing machine, lightly pressing downwards before lifting it.
3.
Open the doors of the drum, pressing them lightly with one hand, while pressing the opening button with the
other.
4.
To improve washing performance, introduce laundry into the washing machine without compressing it or over-
loading the machine. A whole load of highly absorbent fabrics, such as bathrobes and towels, can unbalance the
machine during the spin cycle. The automatic load balancing system arranges laundry in the most even manner
possible, and sets the optimum spin speed to minimise any vibrations.
5.
Close the drum doors making sure they are well hooked.
6.
Dose the right amount of detergent in the appropriate chamber
II
. Add extra detergent in the chamber
I
if you
want to activate the prewash option. For softeners and bleaches, use the chamber marked with the symbols
and
.
7.
Select the wash program most suitable to the type of fabrics by using knob I following the instructions in the pro-
grams table. One of the LEDS on the function bar will light-up to indicate which wash phase the programme will
start with. The End LED will light up to indicate the end of the cycle.
8.
Pressing the
C
button, a diff erent spin speed to that provided by the selected program can be set. The
B
button
allows you to delay the start of the wash cycle up to a maximum of 8 hours. Both values are indicated by the rispec-
tive LEDS.
9.
Buttons
D
,
E
,
F
and
G
allow the selection of supplementary functions. The options selected are indicated by the
relative LEDS. The duration of the wash cycle varies depending on the options enabled.
10.
Press the start button
H
to start the wash cycle. After a few seconds, the Start LED will stay lit to indicate that the
wash programme has started.
A
S T
F
D
G
C
B
E
H
I
Summary of Contents for WTIA107
Page 13: ...13 RU I II A B C D E F G I 1 2 3 4 5 6 II I 7 I 8 C 8 9 D E F G A S T F D G C B E H I...
Page 14: ...14 10 H 11 End I OFF 12 I OFF 8 B F D 1 40 C E C...
Page 18: ...18 A B C D E F G H I S T 1 2 3 4 5 6 7 I 8 C 8 A S T F D G C B E H I...
Page 19: ...UA 19 9 D E F G 10 H 11 End I OFF 12 I OFF 8 B F D 1 40 C E C...
