Freggia WTIA107, Manuals

Page: 10 / 28

10
CONTROL PANEL
• START/PAUSE
When programs and wash options are being selected, the start LED remains off . To confi rm your selection and start
the wash cycle, press the H button.
The LED turns on. During the wash program in progress, the cycle can be stopped by pressing the START/
PAUSE button for a couple of seconds.
At this point, the wash program stops and you can make changes to the wash options (enabled
depending on which stage of the wash cycle you are in). If the water temperature is below 50°C,
the door can be opened (about 2 minutes after enabling the pause function) to load/empty any laundry.
To re-enable the wash phase press the START/PAUSE button again.
N.B. if, during a pause, no operation is carried out, the wash phase will restart automatically after
5 minutes.
• EASY LOGIC
The EASY LOGIC automatically adjusts washing time, water and energy consumption based on the actual amount of
laundry loaded in the machine.
The 1/2 load function is unnecessary as the EASY LOGIC system automatically sets the wash parameters.
CONTROL PANEL
MODEL WTIA128 WTIA108 WTIA127 WTIA107
DIMENSIONS
Width (сm) 40.0 40.0 40.0 40.0
Height (сm) 90.0 90.0 90.0 90.0
Depth (сm) 60.0 60.0 60.0 60.0
Maximum spin speed (revs/min) 1200 1000 1200 1000
Max load (kg) 8.0 8.0 7.0 7.0
Water pressure 0.05 MPa -1 Mpa
Electrical connection See plate affi xed with characteristics
TECHNICAL SPECIFICATIONS
PROGRAMS
TEMPE-
RATURE
(*)
TYPE OF LAUNDRY
MAX
OPTIONS
SPIN SPEED
(REV/MIN)
MAX LOAD DEPENDING
ON THE MODEL AND
THE PROGRAM
SELECTED (KG)
OPTIONS
8.0 7.0
90°C
White linens and heavily soiled cotton, including
organic stains.
Max 8.0 7.0
<60°C
<40°C
The standard 60°C and 40°C cotton programmes are suitable
to clean normally soiled cotton laundry and they are the
most effi cient programmes in terms of combined energy and
water consumption for washing that type of cotton laundry.
The above mentioned programs are in accordance with Euro-
pean Regulations 1015/2010 and 1061/2010 on the specifi c
eco-design requirements. The actual water temperature may
diff er from the declared cycle temperature. The standard
60°C and 40°C cotton programmes were verifi ed in compli-
ance with standard EN60456.
Max 8.0 7.0
PROGRAM TABLE