Freggia WTIA107, Manuals

Page: 9 / 28

9
WASH IN THE CORRECT WAY
GB
11. The end of the wash cycle, the End LED will light up. Turn the knob I to the OFF position and open the door to take
out all the laundry.
12. The program can be cancelled at any time by turning knob I to the OFF position.
CONTROL PANEL
• PROGRAMME PHASE INDICATOR
The progressive lighting up of the LEDS will indicate the programme phase the
washing machine is currently eff ecting.
• DELAYED START
This function allows the start of the wash cycle to be delayed by up to 8 hours. Press button B repeatedly
until the required delay time is indicate by the appropriate LED. LED T will fl ash until the wash cycle
starts.
• RINSE
Press the F button to activate the extra rinse function. This option is recommended if your skin is
particularly sensitive to enzymes in detergents.
• PREWASH
To perform a prewash, press the D button and put the detergent in the drawer 1 . The washing machine
performs a prewash cycle at 40°C, max. Prewash is recommended for garments soiled with dust, dirt and
sand or with particularly stubborn stains. See the program table for further information.
• TURBO
Press the E turbo button to reduce the wash time. The operating parameters are automatically adjusted
to ensure washing eff ectiveness and to allow time to be saved. See the program table for further
information.
• ADJUSTABLE SPIN
Pressing the C button, the spin speed can be adjusted depending on the wash program selected and the
type of fabric. The selected spin speed will be indicated by the lit LED. The
value will exclude the spin
cycle at the end of the cycle.
N.B.: The maximum spin speed varies depending on the model. The speed matched to each
program is the one recommended.
• UNBALANCED LOAD CONTROL DURING SPIN CYCLE
This washing machine is equipped with a special electronic control system for proper load balancing. Prior to every spin,
the system makes sure that the cloths are spread as evenly as possible in the drum. In the case of uneven laundry distri-
bution, for safety reasons, the fi nal spin speed will be reduced and in cases of high load imbalance, will not be performed.
• ANTI-CREASE
Activating the anti-crease option is done by the G button. The washing machine will adjust the wash
parameters to decrease the chance of creases forming, making ironing easier.
The spin speed is automatically set at 500 rev/min.
CONTROL PANEL
Lavaggio Risciacqui Centrifuga Fine
Ritardo Centrifuga Prelavaggio Turbo Risciacqui Antipiega