995066 - Revision A
Page 23 of 41
Step 5 – Pull the Pin out from the bottom fixing to release the Actuator.
Step 6 – Remove the Actuator and rest the Upper Assembly on the Frame as shown.
Refitting / Replacement
Step 7 - Refitting is a reversal of the removal process noting the following point:
A)
Ensure the Actuator is fitted in the correct orientation. With the LIANK Specification
label facing towards the Knee Pad Assembly.
B)
Ensure the Nuts are tight and secure the Actuator, do not over tighten as this will
bend the framework and will affect the functioning of the Actuator.
C)
Apply Loctite 243 to the Actuator Screw Pins before fitting.
