995066 - Revision A
Page 19 of 41
9.2.4 – Cable – Charger
Removal
Step 1 – Where Applicable, turn the charger off at the wall plug and remove.
Step 2 – Detach the Charger lead from the snap lead by pulling them apart as shown.
Step 3 – Detach the snap Lead from its latch circled in the image below and pull the lead
connecter from the Control Box as arrowed.
Step 4 – If the Plug has not already been removed from the wall socket, detach the plug
from its fixing to the Stand Aid.
Refitting / Replacement
Step 5 - Refitting is a reversal of the removal process noting the following points:
A)
Ensure that the snap lead is refitted in the correct orientation in the Control Box
port, and that the snap lead is securely fastened to its latch and will not easily
displace.
