995066 - Revision A
Page 18 of 41
Step 2 – Release the cable from the Actuator by removing the locking device. It is
recommended a flat head screwdriver is used. Push the latch outward and push the part
downward to remove.
Step 3 – Remove the Cable by pulling it out the port, action may be easier using a flat head
screwdriver.
Step 4 – Remove the cable from any clips/cable ties that are routing it along the Stand Aid.
Refitting / Replacement
Step 5 - Refitting is a reversal of the removal process noting the following points:
A)
When fitting the Cable into the Actuator port, ensure the locator aligns correctly for
correct connection to the Leg Actuator.
B)
Route the Cable along the frame Cable Clips to disallow any trailing leads.