LRS-455-EU Data Transceiver Users Manual
LUM0032AA Rev A
Version 1.0
6
Point-to-Point
Repeater (5)
FreeWave allows the use of one repeater in a Point-to-Point communications
link, significantly extending the operating range. When designated as a
Repeater, a transceiver behaves as a pass-through link. All settings for the call
book, baud rates and radio transmission characteristics are disabled. A Repeater
will connect with any Master that calls it. The Repeater must be set up properly
in the Master's call book.
Point-to-Point
Slave/Master
Switchable (6)
Mode 6 allows the transceiver to be controlled entirely through software
commands. A number of key parameters in FreeWave's user interface may be
changed either directly with a program such as Windows Terminal or through the
use of script files. Additionally, when the Point-to-Point Slave/Master Switchable
option is selected and the transceiver is not calling a Slave, it will function as a
Slave and accept any appropriate calls from other transceivers.
Point-to-
MultiPoint
Repeater (7)
This option allows the transceiver to operate as a Repeater in a MultiPoint
network. See the MultiPoint parameters section for details on enabling
MultiPoint Slave/Repeater mode.
