LRS-455-EU Data Transceiver Users Manual
LUM0032AA Rev A
Version 1.0
13
The following 3 tables provide the information to determine optimum setting values.
Minimum Packet Size Definition
Min Setting
Min Packet Size
0
0
1
16
2
32
3
48
4
64
5
80
6
96
7
112
8
128
9
144
Maximum Packet Size (2 level FSK)
Max Setting
Max Packet Size
0
32
1
48
2
64
3
80
4
96
5
112
6
128
7
135
8
135
9
135
(3)
X
MIT
R
ATE
FreeWave transceivers utilize a Master Transmit Beacon to provide low current consumption in the slave
radios. The slave radios will turn their receiver off when no data is being passed.
The Xmit Rate setting allows the duty cycle of the Master Transmit Beacon to be changed. A setting of 0
is the highest duty cycle and a setting of 9 is the lowest duty cycle.
(4)
RF
D
ATA
R
ATE
The RF Data Rate controls the data rate used for over-the-air communication and should not be confused
with the serial port Baud Rate. Currently, the only supported RF Data Rate is
5
.
Note:
In MultiPoint networks, the RF Data Rate must be set identically in all transceivers. Any
transceiver with an RF Data Rate different from the Master will not establish a link.
In Point-to-Point networks the Master’s settings take precedence over the Slave.
RF Data Rate Setting
Occupied Bandwidth
Modulation Level
5
12.5kHz
2-level GFSK
