57
7.2.6 Set Repeat, Copy and Cut block
You can set the block to Repeat, Copy and Cut the recorded file on the PVR Banner.
1.
Play the recorded file.
2.
Locate the control position to the favoured
starting position using the
◀
/
▶
buttons.
3.
Press the
A-B
button to set the start point and
then move the end point using the
◀
/
▶
buttons.
1.
Press the
A-B
button again on the end point and
then a pop-up window is displayed.
2.
You can select the function such as Repeat block,
Copy block or Cut block using the
▲
/
▼
buttons.
3.
Press the
button to start repeating, copying
or cutting block.
4.
Press the
EXIT
button or the
A-B
button to
cancel setting block.
Repeat block: Select to play and repeat the desired section.
Copy block: Select to copy the desired section as a new file on the HDD.
Cut block: Select to cut the desired section from the recording, this file is not saved and
cannot be restored once selected.
Summary of Contents for T2400
