Mainboard User’s Manual
Connectors
3
1.5. Extended Connector Board
1.6. PCI Frequency Setting
The PCI frequency settings are automatically set by the system
1.7. Memory Installation
Note:
The S3 PL133 chipset family used in this mainboard supports
up to two double-sided or three single-sided DIMMs when the
DRAM interface is operating at 133 MHz. Installing DIMM
modules that exceed these specifications requires that the
BIOS down-shifts the SDRAM clocks to 100MHz through a
two-wire interface of the system clock generator.
168-Pin SDRAM Memory Configuration.
Bank 0 (DIMM1)
64MB, 128MB, 256MB, 512MB
Bank 1 (DIMM2)
64MB, 128MB, 256MB, 512MB
Total
1 GB
