Mainboard User’s Manual
Installing Memory System
30
3.7. Installing System Memory
Maximum system memory supported by the mainboard is 1GB.
The mainboard has two DIMM Sockets. Memory can be installed
using 184-pin DDR SDRAM DIMM memory modules. These are no
jumper settings required for the memory size or type, which is
automatically detected by the BIOS.
You must use 2.5V DIMMs in the mainboard. To determine the
DIMM type, check the notches on the DIMMs.
Install the 168-pin DDR SDRAM modules in any combination as
follows:
Bank 0
(DIMM1)
64MB/128MB/512MB
Bank 1
(DIMM2)
64MB/128MB/512MB
Total System Memory
64MB ~ 1GB
