BIOS Configuration
Power Management
51
State After Power Failure:
This sets the power state after a power
failure. If the value is set to “ON,” the system turns back on. If the
value is set to “OFF,” the system remains turned off. If the value is
set to “Auto,” the system returns to the last power state.
CPU Fan In Suspend:
If set to “On,” the CPU fan will be powered
off during suspend mode. Options are “On” and “Off” (default).
Wake Up Events:
This item opens a submenu that enables you to set
events that will resume the system from a power saving mode. Select
Wake Up Events and press <Enter> to display the following menu:
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
Wake Up Events
Item Help
VGA
OFF
LPT & COM
LPT/COM
HDD & FDD
ON
PCI Master
OFF
Resume by Ring
Disabled
Resume by Alarm
Disabled
x
Date (of Month)
0
x
Resume Time (hh:mm:ss)
0 0 6
Primary INTR
ON
IRQs Activity Monitoring
Press Enter
Menu Level
↑
↑
↓
↓
→
→
←
←
: Move Enter : Select
+/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F5:Previous Values
F6:Fail-Safe Defaults
F7:Optimized Defaults
VGA:
When set to “On,” the system power will resume the system
from a power saving mode if there is any VGA activity. Default is
“Off.”
LPT & COM:
When this item is enabled, the system will restart the
power-saving timeout counters when any activity is detected on the
serial ports, or the parallel port.
HDD & FDD:
When set to “On,” any activity from one of the listed
system peripheral devices wakes up the system.
PCI Master:
When set to “On,” any activity from one of the listed
devices wakes up the system.
Summary of Contents for P6F127
Page 1: ...P6F127 Mainboard Manual Friday March 02 2001 ...
Page 2: ......
