Freetech P6F127 Manual Download Page 10

Page: 10 / 70

Mainboard User’s Manual

Connectors

1.7. Connectors

FAN1

CPU FAN Connector:

This 3 -pin header is used for con-

necting the CPU fan.

CD1/2

CD Connectors:

These 4 -pin headers are used for con-

necting the CD ROM audio input to the sound card.

USB2

USB Connector:

This 8 -pin.

JP4

Infrared (IR) Connector:

This 5 -pin header is used to

connect an infrared (IR) port for use of IR devices.

JP5

Modem Wake UP Connector:

This 3 -pin header is used

for remote wake up of the computer through a modem.

JP6

LAN Wake Up Connector:

This 3 -pin header is used for

remote wake up of the computer through a network card.

SYSTEM
FAN

System Fan Connector:

This 3 -pin header is for con-

necting the case fan that keeps the syste m cool.

1.8. Memory Installation

168-Pin DIMM SDRAM Memory Configuration

Bank 0 (DIMM1)

8, 16, 32, 64, 128, 256, 512 MB

Bank 1 (DIMM2)

8, 16, 32, 64, 128, 256, 512 MB

Bank 2 (DIMM3)

8, 16, 32, 64, 128, 256, 512 MB

Total

8 MB to 1.5 GB

This concludes Chapter 1. Chapter 2 covers the mainboard’s specifi-
cations and fe atures.

Summary of Contents for P6F127







































































Search results

Summary of Contents for P6F127

Reviews:

Related manuals for P6F127

Brands by name

Popular brands

Freetech P6F127, Manual

Search results

Summary of Contents for P6F127

Reviews:

Related manuals for P6F127

Brands by name

Popular brands