Freetech P6F125 Manual Download Page 9

Page: 9 / 66

P6F125 Quick Reference

PCI and AGP Frequency Settings

1.5. PCI and AGP Frequency Settings

The PCI and AGP frequency settings are automatically set by the
system.

1.6. Connectors

COM2

Serial Port Connector:

This 10-pin header is used to

connect a serial port extension bracket for adding a
second serial port to your system.

CPU FAN

CPU FAN Connector:

This 3 -pin header is used for con-

necting the CPU fan.

LCD/DVI Connector:

This 20-pin header is used for a t-

taching a flat panel DVI or LCD monitor. (optional)

JP1

TV Audio-out Connector:

This 3 -pin header is used for

connecting TV audio. (optional)

JP4

TV out Connector:

This 8 -pin header is used to connect a

TV lineout. (optional)

Infrared (IR) Connector:

This 5 -pin header is used to

connect an infrared (IR) port for use of IR devices.

CD1/2

CD Connectors:

These 4 -pin headers are used for con-

necting the CD ROM audio input to the sound card.

AUX

Auxiliary Connector:

This 4 -pin header is an auxiliary

input connector.

WOL

Wake On LAN Connector:

This 3 -pin header is used for

remote wake up of the computer through a network card.

USB(2)

USB Connector:

This 8 -pin header is used for con-

necting front panel USB ports 3 and 4.

USB(3)

USB Connector:

This 12-pin header is used for con-

necting front panel USB ports 5, 6, and 7. (optional)

SYS FAN

System Fan Connector:

This 3 -pin header is for connect-

ing the case fan that keeps the system cool.

1.7. LEDs

Red

The red indicator LED1 lights up when the system
enters suspend to DRAM mode.

Summary of Contents for P6F125



































































Search results

Summary of Contents for P6F125

Reviews:

Related manuals for P6F125

Brands by name

Popular brands

Freetech P6F125, Manual

Search results

Summary of Contents for P6F125

Reviews:

Related manuals for P6F125

Brands by name

Popular brands