Freetech P6F125 Manual Download Page 65

Page: 65 / 66

Driver and Utility

Intel 81x AGP Installation

5.3. Intel 81x AGP Installation

This folder has the software and drivers for the graphics system built
into the 81x chipset.

The Installation Steps:

1. Insert the manufacturer’s CD-ROM into your PC’s CD-

ROM drive.

2. Click Driver Install.

3. Select the folder 81x AGP driver for WIN2000/9X/NT40

or OS2 to start the installation:

4. Follow the instructions on the screen to complete the instal-

lation. After setup is completed, you need to restart the
computer.

5.4. AD1881 Audio Driver

Software and drivers are provided for the AD1881 codec sound sys-
tem that is integrated on this mainboard. The AD1881 codec allows
the system to generate optimal sound effects. Drivers are provided
for Windows NT/2000/98/95.

The Installation Steps:

1. Insert the manufacturer’s CD-ROM into your PC’s CD-

ROM drive.

Summary of Contents for P6F125



































































Search results

Summary of Contents for P6F125

Reviews:

Related manuals for P6F125

Brands by name

Popular brands

Freetech P6F125, Manual

Search results

Summary of Contents for P6F125

Reviews:

Related manuals for P6F125

Brands by name

Popular brands