Mainboard User’s Manual
50
PnP/PCI Configurations
Resources Controlled By:
The default setting is “Manual” which al-
lows you to control IRQs and DMAs individually. The other option
is “Auto” which will detect the system resources and automatically
assign the relative IRQs and DMAs for each peripheral.
IRQ Resources:
These fields only become available if the Resources
Controlled By field is set to “Manual.” If there is a legacy ISA device
which uses an IRQ or a DMA, set the corresponding IRQ or DMA to
“Legacy ISA”; otherwise, you should set this field to “PCI/ISA PnP.”
PCI/VGA Palette Snoop:
This item is designed to overcome some
problems that can be caused by some non-standard VGA cards. This
board includes a built-in VGA system that does not require palette
snooping so you must leave this item disabled.
INT Pin 1/2/3/4 Assignment:
Names the interrupt request (IRQ) line
assigned to PCI 1 to PCI 4 on your system. Activity of the selected
PCI slot awakens the system.
After you have made your selections in the PNP/PCI Configuration
Setup, press the <ESC> key to go back to the main program screen.
Summary of Contents for P6F125
Page 1: ...P6F125 Mainboard Manual Friday March 02 2001 ...
Page 2: ......
