ENGLISH
S1. Start/stop button
S2. Lap/reset button
S3. Mode button
S4. Light button
FEATURES
- Time Of Day
- 1/100s Stopwatch up to 1 hour
- Dual Time
- Daily Alarm
- Dual Time Alarm
- Preset Timer (1, 3, 5, 10, 15, 25,
30, 45 and 60 minutes)
- Hourly Chime
- Calendar (Month/Date/Day of
Week)
- 3 seconds delay EL backlight
- 50M water resistant
- 10 lap and lap recall function
- Easy setting function
DISPLAY MODES:
The watch has five display modes:
HOME TIME (TIME) / FOREIGN
TIME (TM-2), ALARM (ALM1/
ALM2), STOPWATCH (STW),
COUNTDOWN RECALL DATA
(RCL) and TIMER (TMR).
To change from one display mode
to another, press S3 button once.
The mode description will appear
for approximately 2 seconds be-
fore activating the selected mode.
PROMPTING ARROWS
The S1, S2 and S3 buttons each
has a prompting arrow.
Their corresponding arrow will
appear whenever the button is
required while setting the times,
calendar and alarms.
In any setting mode, holding
S1 button for approximately 2
seconds will advance the digits at
a fast pace.
HOME AND FOREIGN DISPLAY
To display FOREIGN TIME,
press S2 button when HOME
TIME is displayed. The mode
description(TM-2) will appear
shortly before FOREIGN TIME
is displayed. To change back to
HOME TIME, press S2 button
again.
TO SET THE TIME AND CALEN-
DAR
1. Press S3 button to select time
mode.
2. Press S2 button to toggle
between HOME TIME and
FOREIGN TIME mode.
3. Press and hold S2 button for
2 seconds until the message
“SET” appears and the hour
digits blink.
4. Press S1 button once to
increase the digits by one unit,
holding down the button will
speed up the process.
5. Press S3 button, the minute
digits will blink.
6. Press S1 button once to
increase the digits by one unit,
holding down the button will
speed up the process.
7. Press S3 button, the second
digits will blink.
8. Press S1 button to reset the
second digits to zero.
9. Follow the same pattern to set
month, date, day (of the week),
hour format and calendar
format.
10. To set the hour format, press
S1 button to toggle between
12-hour and 24-hour format.
The PM indicator may display
to indicate the time in 12-hour
format.
11. To set the calendar format,
press S1 button to toggle be-
tween M-D (month-date) and
D-M (date of month) format.
12. When finished making all the
settings, press S2 button to
confirm.
NOTE: The chosen hour and
calendar formats will apply to both
home and foreign settings.
NOTE: In the FOREIGN TIME
mode, only hour, minute, month,
date, day (of the week) are opened
to set.
TO SET THE ALARM TIME
1. Press S3 button to select alarm
mode.
2. Press S2 button to toggle be-
tween ALM1 and ALM2 mode.
3. Press and hold S2 button for
2 seconds until the “SET”
message appears and the hour
digits blink.
4. Press S1 button once to
increase the digits by one unit.
Holding down the button will
speed up the process.
5. Press S3 button, the minute
digits will blink.
6. Press S1 button to set the
minute digits. Holding down
the button will speed up the
process.
7. When finished making all the
settings, press S2 button to
confirm.
TO TURN ON/OFF THE ALARM
AND HOURLY CHIME
In alarm mode,
1. Press S2 button to toggle be-
tween ALM1 and ALM2 mode.
2. Press S1 button once to activate
the daily alarm. Alarm indicator
will appear.
3. Press again to activate the
hourly chime. Chime indicator
will appear.
4. Press the third time to activate
both functions. Alarm indicator
and chime indicator
will appear.
5. Press the fourth time to de-
activate both functions. Alarm
indicator
and chime
indicator
will disappear.
WHEN AN ALARM OR HOURLY
CHIME GOES OFF
A tune will go off by the hour if the
hourly chime function is activated.
A 20-second alarm tune will be
emitted at the designated time
when the alarm is activated. To
stop the tune, press any button.
To disable the functions, press S3
button to select ALM1 or ALM2
mode, then press S1 button to
turn off the indicator of the func-
tion as desired.
TO USE THE STOPWATCH
1. Press S3 button to select STOP-
WATCH mode.
2. The stopwatch will be displayed
in its current state – stopped,
running or reset.
3. To resume a stopped counting,
press S1 button to resume from
where it left off.
4. To start a new counting, reset
the stopwatch to zero first.
Press S1 button to stop counting
and then press and hold S2 but-
ton for approximately 3 seconds
to reset the counter to zero.
For the measurement of elapsed
time:
In STOPWATCH mode,
1. Press S1 button to start count-
ing.
SPRINT
S1
S4
S2
S3
Freestyle_SPRINT_AG9153-R01.indd 2
8/30/12 2:37:01 PM
