PowerQUICC™ MPC8313E Reference Design Board (RDB), Rev. 4
Freescale Semiconductor
3
MPC8313E RDB Hardware
– eTSEC2, selectable RGMII or SGMII: one 10/100/1000 BaseT RJ-45 interface using
Marvell 88E1111 PHY
— USB 2.0 port: high-speed host/device
— USB interface: selectable on-chip PHY or external ULPI PHY interface by SMSC USB3300
USB PHY
— PCI: 32-bit PCI interface running at up to 66 MHz
– One 32-bit 3.3 V PCI slot connected to PCI bus
– One 32-bit 3.3 V miniPCI slot connected to PCI bus
— Dual UART ports:
– DUART interface: supports two UARTs up to 115200 bps for console display
•
Board connectors:
— LCD connectors by GPIO
— ATX power supply connector
— JTAG/COP for debugging
•
IEEE Std. 1588™ signals for test and measurement
•
Real-time clock and thermal sensor on I
2
C bus
•
Programmable LEDs for debug use
•
6-layer PCB routing (4-layer signals, 2-layer power and ground)
