Freescale Semiconductor MPC8313E PowerQUICC II Pro, User Manual

Page: 29 / 52

PowerQUICC™ MPC8313E Reference Design Board (RDB), Rev. 4
Freescale Semiconductor 29
Micro-Jumper/Resistor Options for eTSEC1
There are alternative settings for REVA boards:
Setup 2:
• eTSEC1, USB DR with external ULPI USB PHY (USB3300)
• eTSEC2, SGMII (remove R87, C275; connect 125 MHz clock from R181 to SGMII SCLK)
The corresponding micro-jumper settings are shown in Table 7 .
Setup 3:
• eTSEC1, USB DR with external ULPI USB PHY (USB3300)
• eTSEC2, RGMII
The corresponding micro-jumper settings are shown in Table 8 .
Table 7. Alternative Micro-jumper Settings for REVA (Setup 2)
Jumper Setting Jumper Setting Jumper Setting Jumper Setting
J13 open J7 2-3 J5 2-3 J18 1-2
J12 open J9 2-3 J1 2-3
J16 open J6 2-3 J2 2-3
J15 open J8 2-3
J17 open J3 2-3
J14 2-3 J4 2-3
J11 2-3
J10 2-3
Table 8. Alternative Micro-jumper Settings for REVA (Setup 3)
Jumper Setting Jumper Setting Jumper Setting Jumper Setting
J13 open J7 2-3 J5 2-3 J18 1-2
J12 open J9 2-3 J1 2-3
J16 open J6 2-3 J2 2-3
J15 open J8 2-3
J17 open J3 2-3
J14 2-3 J4 2-3
J11 2-3
J10 2-3