PowerQUICC™ MPC8313E Reference Design Board (RDB), Rev. 4
Freescale Semiconductor
23
Connectors, Jumpers, Switches, and LEDs
selection between the two requires modification of micro-jumpers/resistor options as discussed later. By
default, the on-chip PHY USB is used.
Figure 22
shows the USB connectors in front panel.
Figure 22. USB Connectors
3.5
Ethernet Connectors (P5, P6, P7)
The MPC8313E RDB has six Ethernet ports (RJ-45). The first five ports (G0–G4) are supported by
eTSEC1 (L2 switch), and the last port (G5) is supported by eTSEC2 (GBE PHY).
Figure 23
shows the
G0–G5 mapping viewing from the front panel.
Figure 23. Ethernet Connectors
USB LEDs:
CTL1
CTL
0
VBUS
for external
ULPI USB PHY
for on-chip
PHY
G0
G1
G2
G3
G4
G5
USB mini-AB
USB Type A
RX
Dupl
e
x
Li
nk10
0
Li
nk10
G5 LEDs
Link1000
TX
A
B
A
B
A
B
A
B
A
B
A: Link/Activity 1000
B: Link/Activity 10/100
G0-G4 LEDs:
