PowerQUICC™ MPC8313E Reference Design Board (RDB), Rev. 4
2
Freescale Semiconductor
MPC8313E RDB Hardware
Use this manual in conjunction with the following documents:
•
MPC8313E PowerQUICC™ II Pro Integrated Communications Processor Family Reference
Manual (MPC8313ERM)
•
MPC8313E PowerQUICC II Pro Processor Hardware Specifications (MPC8313EEC)
•
“Hardware and Layout Design Considerations for DDR Memory Interfaces” (AN2582)
NOTE
The normal function of the product may be disturbed by strong
electromagnetic interference. If so, simply reset the product to resume
normal operation by following the instructions in the manual. If normal
function does not resume, use the product in another location.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy. If it is
not installed and used in accordance with the instruction manual, it may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference at his or her
own expense.
1
MPC8313E RDB Hardware
This section covers the features, block diagram, specifications, and mechanical data of the MPC8313E
RDB.
1.1
Features
The board features are as follows:
•
CPU: Freescale MPC8313E running at 333/166 MHz; CPU/coherent system bus (CSB)
•
Memory subsystem:
— 128 Mbyte unbuffered DDR2 SDRAM discrete devices
— 8 Mbyte flash single-chip memory
— 32 Mbyte NAND flash memory
— 256 Kbit M24256 serial EEPROM
— SD connector to interface with the SD memory card in SPI mode
•
Interfaces:
— 10/100/1000 BaseT Ethernet ports:
– eTSEC1, RGMII: five 10/100/1000 BaseT RJ-45 interfaces using Vitesse
™
VSC7385 L2
switch, or selectable one 10/100/1000 BaseT RJ-45 interface using Marvell
™
88E1111 PHY
in REVC board
