Introduction
MPC5604P Controller Board User’s Guide, Rev. 0
Freescale
7
Figure 3. MPC5604P Controller Board Jumper Position
2.4
Board LEDs
The
Table 2
displays the on-board LEDs. For on-board LED locations, see
Figure 2
.
BRAKE
UNI-3 Brake output signal is
connected to GPIO C[3].
R333 populated
PFC
UNI-3 PFC output signal is
connected to GPIO G[6]
(PWMA3).
R334 populated
PFC_EN
UNI-3 PFC Enable signal is
connected to GPIO G[7]
(PWMB3).
R335 populated
PFC_ZC
UNI-3 PFC zero current
signal is connected to GPIO
G[5] (PWMX3).
R336 populated
Table 1. MPC5604P Controller Board Jumper Options
#
Selector
Function
Connections