Freescale Semiconductor i.MX 6SoloLite Linux Reference Manual Download Page 23 | Manualshive

Page: 23 / 199

background image

Table 2-1. Linux BSP Supported Features (continued)

Feature

Description

Chapter Source

Applicable

Platform

development platforms. Driver implementations are
often different for different platforms. It is used by the
DPM layer.

CPU Frequency
Scaling

The CPU frequency scaling device driver allows the
clock speed of the CPUs to be changed on the fly.

CPU Frequency Scaling
(CPUFREQ) Driver

i.MX
6SoloLite

DVFS

The Dynamic Voltage Frequency Scaling (DVFS)
device driver allows simple dynamic voltage frequency
scaling. The frequency of the core clock domain and
the voltage of the core power domain can be changed
on the fly with all modules continuing their normal
operations.

Dynamic Voltage Frequency
Scaling (DVFS) Driver

i.MX
6SoloLite

Multimedia Drivers
LCD

The LCD interface driver supports the Samsung
LMS430xx 4.3" WQVGA LCD panel.

ELCDIF Frame Buffer Driver

i.MX
6SoloLite

EPDC

The Electrophoretic Display Controller (EPDC) is a
direct-drive active matrix EPD controller designed to
drive E Ink EPD panels supporting a wide variety of
TFT backplanes.

Electrophoretic Display Controller
(EPDC) Frame Buffer

i.MX
6SoloLite

SPDC

SPDC is a direct-drive active matrix EPD controller
designed to drive Sipix panel for E-Book application.
The SPDC provides control signals for the source driver
and gate drivers. This IP provides a high performance,
low cost solution for SiPix EPDs (Electronic Paper
Display).

Sipix Display Controller (SPDC)
Frame Buffer

i.MX
6SoloLite

PxP

The Pixel Pipeline (PxP) DMA-ENGINE driver provides
a unique API, which are implemented as a dmaengine
client that smooths over the details of different
hardware offload engine implementations.

PXP DMA-ENGINE Driver

i.MX
6SoloLite

Sound Drivers
ALSA Sound

The Advanced Linux Sound Architecture (ALSA) is a
sound driver that provides ALSA and OSS compatible
applications with the means to perform audio playback
and recording functions. ALSA has a user-space
component called ALSAlib that can extend the features
of audio hardware by emulating the same in software
(user space), such as resampling, software mixing,
snooping, and so on. The ASoC Sound driver supports
stereo CODEC playback and capture through SSI.

ALSA Sound Driver

i.MX
6SoloLite

Memory Drivers
SPI NOR MTD

The SPI NOR MTD driver provides the support to the
Atmel data Flash using the SPI interface.

SPI NOR Flash Memory
Technology Device (MTD) Driver

i.MX
6SoloLite

Input Device Drivers
Networking Drivers
ENET

The ENET Driver performs the full set of IEEE 802.3/
Ethernet CSMA/CD media access control and channel
interface functions. The FEC requires an external
interface adaptor and transceiver function to complete

Fast Ethernet Controller (FEC)
Driver

i.MX
6SoloLite

Table continues on the next page...

Chapter 2 Introduction

i.MX 6SoloLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

Freescale Semiconductor, Inc.

23

«
...
21
22
23
24
25
...
»

Summary of Contents for i.MX 6SoloLite Linux








































































































































































































Reviews:

No comments

Related manuals for i.MX 6SoloLite Linux

i-bus KNX IPR/S 3.5.1

Brand: ABB Pages: 44

SCSI PC Card REX-9530V

Brand: Ratoc Systems Pages: 30

Brand: N.A.T. Pages: 32

APS6-400 Series

Brand: Eaton Pages: 114

Surround Dongle

Brand: Sennheiser Pages: 18

Brand: Idis Pages: 31

Brand: Supersonic Pages: 46

Brand: Xantech Pages: 4

Brand: VCS Pages: 118

Brand: Observint Pages: 117

zoomno MSC-5578

Brand: BIIZZY Pages: 2

Brand: ALIBI Pages: 232

Brand: AXIOMTEK Pages: 2

Brand: Boser Pages: 54

WIRELESS-G CARDBUS PC CARD - GUIDE D

Brand: Hawking Pages: 26

Brand: MSI Pages: 3

Brand: InfoStor Pages: 6

Brand: Juniper Pages: 84

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands