MMCCMB2103UM/D
User’s Manual
37
Using the SysDS Loader
•
The default Mode field value is Byte.
•
When the Upload To File dialog box shows appropriate values, click on the Save
button. A progress message appears during uploading.
11.
To verify that the contents of Flash memory match the selected download file, click on the
Verify button. A progress message appears as verification begins. A Verify successful
message appears at the end of verification.
•
If verification fails, an error message specifies the location that did not have the
expected contents.
•
To recover from a verification failure, try downloading Flash again, to replace the
selected download file.
12.
To view the contents of Flash memory, click on the Display button. This brings up the
Display Flash/Ram display (Figure 3-3).
Figure 3-3 Display Flash/Ram Display
•
The Address field shows the first address of the value display. One way to change the
display is to enter a different address in this field.
•
Another way to change the value display is to use the scroll bars.
•
Use the Mode field to specify byte, half-word, or word values in the display.
•
When you are done viewing the display, click on the Close button to return to the main
screen.
13. To erase FLASH memory, click on the Erase FLASH button. The SysDS Loader erases all
contents of the FLASH memory except for the sectors that contain system software.
F
re
e
sc
a
le
S
e
m
ic
o
n
d
u
c
to
r,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
c
.
..
