FREERIDER X2 HUB, Manual, Page: 4 / 20

4. Safety
5. Package content
3.4. EEC Document (European Certificates of Conformity)
For the approval of your FREERIDE X2 HUB, use the attached DIN A4 sheet (European Certificate of
Conformity EEC). This makes the scooter acceptable throughout Europe. EEC approval requires the
fixed seat for driving in public transport. The holding in a standing position is not permitted. FREERIDE
X2 HUB may only be driven by one person.
3.5. Walking and cycling paths
The use on public bicycles and pedestrians is not permitted unless this is shown separately.
The improper use can lead to serious injuries. The driver can minimise this risk by using different safety
standards, such as: wearing a helmet, goggles, gloves, elbow and knee protectors and appropriate
footwear.
Do not use the scooter on smooth, oily or unpasteurised surfaces. Do not drive under the influence of
alcohol and /or drugs.
Avoid uneven substrates, impact holes, cracks in the pavement and other obstacles. If wet, note the
increased risk of slipping and falling.
The device should not be used by persons with reduced vision, balance, coordination, reflexes, muscle
and bone strength and estimation.
It should not be used by people who cannot or do not want to take responsibility for their actions.The
driver assumes all risks associated with the use of the vehicle.
Your scooter comes with below accessories:
1.Instructions
2.Tool kits
3.Fuse
4.Licence plate
5.Charger
6.COC certificate
3