manualshive.com logo in svg

FREERIDER X2 HUB, Manual, Page: 17 / 20

Share
Download
FREERIDER X2 HUB Manual Download Page 17

         NOTE

Regular and properly implemented care measures serve to maintain the value of FREERIDE X2 HUB and 
are important prerequisites for the recognition of warranty claims.
Corrosion due to lack of care or winter operation is not guaranteed!!!

-Paint, rubber and plastic parts shall not be treated with aggressive or penetrating cleaning or solvents. 
This can lead to damage.
-Do not use a pressure jet for cleaning!
-The high water pressure can cause severe damage to electronics, tires, warehouses, seals.
-Use a soft, moist cloth to wash.
-Do not wipe dirt with dry cloth, as otherwise scratches in the paint
arise.

Care

The electric scooter should be maintained regularly and if necessary with commercial, pH -neutral and 
non -aggressive preservatives and care. Treat parts at risk of corrosion regularly with preservatives and 
care products, but especially in winter.

16. Instructions

17. Technical data

16

Model
Motor
Battery

Range per charge
Max speed

N.W/G.W
Max load

Frame material
Dimension(LxWxH)

Tire size
Headlight
Taillight
Number plate light
Horn
Mirror
Speedometer
Suspension
Brake system

Charge time

FREERIDE X2 HUB

2500W dual motor (F/R)

60V 20Ah lithium battery

8-11hours

55km

45km/h

Hight-tensile steel for battery box,Alloy for front and rear arm-swing

1300 x 640 x 1280mm

44.8/49.8KGS

95KGS

90/65-6.5 e-mark approval

LED 12V e-mark approval
LED 12V e-mark approval
LED 12V e-mark approval

12V e-mark approval

e-mark approval

LCD digital display

Single shock / dual shock  (F/R)

Disc brake (F/R)

Summary of Contents for X2 HUB





















Reviews:

No comments