8
• Assembly requires two persons.
•
Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you fi nish all assembly steps.
• To identify small parts, see page 7.
• After shipping, there may be an oily substance
on the exterior of the treadmill. This is normal. If
there is an oily substance on the treadmill, wipe
it off with a soft cloth and a mild, non-abrasive
cleaner.
•
Assembly requires the following tools:
one set of English hex keys
one Phillips screwdriver
To avoid damaging parts, do not use power tools.
ASSEMBLY
1.
Make sure that
the power cord
is unplugged. Be
careful not to pinch
the power cord.
Next, identify the Right Upright (99). Have a
second person hold the Right Upright near the
Frame (58).
See the inset drawing.
Tie the wire tie (A) in
the Right Upright (99) securely around the end
of the Upright Wire (97). Then, insert the Upright
Wire into the lower end of the Right Upright as
you pull the other end of the wire tie through the
Right Upright.
97
99
A
58
2
99
97
A
1
