9
6. Hold the Pulse Handrail (86) near the Handrail
Assembly (88). Insert the Left and Right Pulse
Wires (90, 91) into the top of the Handrail
Assembly and out of the holes in the sides.
Slide the Pulse Handrail (86) into the Handrail
Assembly (88).
Be careful not to pinch the
Pulse Wires (90, 91).
Attach the Pulse Handrail (86) to the Handrail
Assembly (88) with four 1/4" x 1/2" Patch Bolts
(3) and four 1/4" Star Washers (9).
Start all four
Bolts before firmly tightening any of them.
Remove the two plastic ties and the wire tie.
6
88
86
3
9
3
9
78
Wire Tie
90
91
Hole
Plastic
Tie
Plastic Tie
Hole
7. Set the Console Cover (87) on the Handrail
Assembly (88). Make sure that the Console
Cover is oriented with the ties toward the bottom
as shown.
Attach the Console Cover (87) with four #8 x
3/4" Screws (1).
Start all four Screws before
tightening any of them. Do not overtighten
the Screws.
Insert the wires (78, 90, 91) through the loops in
the indicated ties.
7
Ties
1
87
91
90
78
Ties
1
88
