10
9
44
42
43
2
10
Wire Tie
Wire
Tie
1
9. Orient the Upright (2) and the Top Shield (44)
as shown. Slide the Top Shield upward onto the
Upright.
Have a second person hold the Upright (2) and
the Top Shield (44) near the Frame (1) until
step 10.
Locate the wire tie in the Upright (2). Tie the
lower end of the wire tie to the Main Wire (43)
and to the Frame Pulse Wire (42). Next, pull the
upper end of the wire tie upward out of the top
of the Upright.
Tip: To prevent the wires from falling into
the Upright (2), secure the wires with the
wire tie.
10.
Tip: Avoid pinching the wires.
Slide the
Upright (2) onto the Frame (1).
Attach the Upright (2) with four M10 x 16mm
Patch Screws (67) and four M10 Split Washers
(100).
Tip: Tighten the two Patch Screws in
the front of the Upright and then tighten the
other two Patch Screws.
Slide the Top Shield (44) downward and press it
onto the Left and Right Front Shields (13, 14).
Avoid pinching
the wires
2
1
67
67
100
100
13, 14
44
