9
2. Identify the Short Base (17) and the Weight
Stack Base (109). Orient both parts as shown.
Attach the Short Base (17) to the Weight Stack
Base (109) with two M10 x 68mm Bolts (98), two
M10 Washers (93), and an M10 Locknut (84);
do
not tighten the Bolts yet.
3.
See the inset drawing.
Identify the Long
Base (1).
Attach the Long Base (1) to the Weight Stack
Base (109) with two M10 x 68mm Bolts (98), two
M10 Washers (93), and an M10 Locknut (84);
do
not tighten the Bolts yet.
Then, attach the Long Base (1) to the Short
Base (17) with two M10 x 68mm Bolts (98) and
two M10 Washers (93);
do not tighten the
Bolts yet.
3
2
109
17
93
93
84
98
109
17
1
93
93
84
98
98
1
