P46
HOW TO
HOW TO SET UP CAMERA RUN/STOP
1
Navigation: Home -> FIZ Config -> Camera Type (Scroll SET).
2
Settings Action: Save (Scroll SET).
3
Press SET Button.
4
Connect the selected camera connection cable.
AUTOMATIC CALIBRATION OF A SINGLE AXIS
1
Navigation: Main -> FIZ Detail -> CAL: AT (Scroll SET to AT).
2
Press SET Button.
1
Motors will test motion in both directions, then sense hard stops.
2
Status is displayed in the “STAT:” field on the display.
HOW TO SET UP YOUR MOTOR TYPE
1
Navigation: Home -> FIZ Axis Cfg -> Motor Model (Scroll SET).
2
Settings Action (Scroll SET to Save).
3
Press SET Button.
AUTOMATIC CALIBRATION OF ALL AXES SIMULTANEOUSLY
1
Navigation: Main -> FIZ Main -> CAL.
2
Press SET Button.
3
Motors will test motion in both directions, then sense hard stops.
