
P35
WEDGE CONFIGURATION SCREEN 1
WEDGE CONFIGURATION SCREEN 2
FIZ CONFIG
This screen is used for general configuration of the Wedge. It contains settings that are axis-specific but not common to all axes, and other non-axis related settings.
SETTINGS
ACTION
Scrolling SET allows selection of Load Defaults/Load Saved/Save. Pressing SET performs the requested option. This only affects settings
that are persistent and not state dependent. The units and scaling are not persistent.
CAMERA TYPE
This selects the type of camera that the FIZ is connected to. Note that the proper cable must be used to control the camera, and this
setting must be set correctly.
FOCUS SCALE
Linear/Stretched. Setting this to Stretched causes more of the focus knob travel to be used in the longer focal distance range where the
scale gets compressed. This allows greater fidelity of focal point as the focal distance grows.
FOCUS STD/
METRIC UNIT
Selects between Feet/Inch or Meters to be used for focus distance measurements when the selected units for the focus axis is
Distance.
LENS UNIT FOCUS
(PERCENT/
DISTANCE)
Setting this to distance shows the Focus position in physical units or percent. A lens must be selected to show physical units.
LENS UNITS IRIS
(PERCENT/FSTOP)
Setting this to distance shows the Focus position in physical units or percent. A lens must be selected to show physical units.
LENS UNITS ZOOM
(PERCENT/FOCAL
LENGTH)
Setting this to Focal Length shows the Zoom position in physical units or percent. A lens must be selected to show physical units.