. . . . .
G E T T I N G S T A R T E D
Installing the freeGuard Blaze 2100
Version 3R2
Security Appliance User Guide
2-3
labeled eth0 through eth7. Use these interfaces to connect other
network devices as necessary.
Figure 2-1
displays the eth1 interface connected to an Internet router
using a twisted pair Ethernet cable, while the eth0 interface is connected
to a switch on your local area network (LAN) using another twisted pair
Ethernet cable.
Figure 2-1: Connecting the freeGuard Blaze 2100 to other Network
Devices
CONFIGURING THE FREEGUARD BLAZE 2100
After you supply power to the freeGuard Blaze 2100, use the console
interface to initially configure the card.
Table 2-1
lists the required console cable pin-out that you use to manage
the freeGuard Blaze 2100.
Table 2-1: Console Cable Pin-Out
Female 2x5 Header
Female DB9
1
1
2
6
3
2
4
7
5
3
6
8
7
4
