S Y S T E M M A N A G E M E N T
Additional System Management Tasks
4-14
Security Appliance User Guide
Version 3R2
4
-- running platform type .... security appliance
-- calibration frequency ..... 38.4Mhz
-- running boot image ........ primary
-- running mos image ......... primary
-- total mos reboot count .... 1
-- mos last reboot date ...... 2006-05-22 16:58:07 UTC
++ post result
--------------
-- ddr2 memory test .......... passed
-- jffs2 flash memory test ... passed
-- test i2C bus .............. passed
-- test fan/temp controller... passed
-- test phy control dev ...... passed
-- test rtc device ........... passed
-- test external tcam ........ passed
-- test fiber ext-loopback ... passed
-- test copper ext-loopback .. passed
G U I E X A M P L E : V I E W I N G S Y S T E M I N F O R M A T I O N
1
System > Status
CREATING ALIASES
Use the
set alias
command to create an alias that is a named variable
containing the initial characters of a command-line interface (CLI)
command:
set alias {name_str} string
E X A M P L E : C R E A T I N G A N A L I A S
To create an alias called int_0 for the get interface eth0, use the
set
alias
command:
set alias int_0 “get interface eth0”
