Freedom Lite Installation Manual Revision 12
P a g e
8 | 30
where applicable. This service is not available in all countries. Please enquire with Freedom
Won Sales.
The “Home” series is designed for wall mounting in order to preserve room and floor space
and offer a convenient obstruction free and aesthetically pleasing solution. Each model is
fitted to the wall using two Rawl Bolts. The Rawl Bolts are inserted into correct diameter pre
drilled holes in the wall.
The bolts must first be tightened substantially so that the internals
of the Rawl Bolt have gripped tightly into the wall, and then the bolt must be turned out
slightly with the head protruding so that about 5mm of the bolt shank is visible. This pre-
tightening prevents the bolt from being pushed into the wall when mounting the Lite.
The
Freedom Lite has two keyhole shaped holes on the back, which are shaped to fit over the
bolt heads and then a narrowed section secures around the bolt shank as the unit is lowered
into its final position. The 5/4, 10/7 and 15/11 models are hung using M8 bolts whilst the
20/14 and 30/21 models are hung on M10 bolts. The centre to centre spacing of these bolts
must be applicable to the model being installed. It is critical that these bolts are mounted
within 1mm of the correct dimension and must be
perfectly level
.
Figure 3.1 Bolt Mounting Keyhole on Rear of Lite Casing – floor mount retaining tab and
fitted eye bolt also visible