background image

05/15/08 

If you fail to heed these warnings, damage to your chair, a fall, tip-over, or 
loss of control may occur and cause severe injury to the rider or others. 
 

Dressing or Changing Clothes 

Your weight may shift if you dress or change clothes while seated in this chair. To 
reduce the risk of a fall or tip-over: 
1.  Rotate the front casters until they are as far forward as possible. This makes the 

chair more stable. 

2.  Lock wheel locks into place. 

If you fail to heed these warnings, damage to your chair, a fall, tip-over, or 
loss of control may occur and cause severe injury to the rider or others.
 

 

Wheelies 

“Wheelies”, (tilting the wheelchair backward to its balance point), are extremely 
dangerous as the chair may tip over. Freedom Designs, Inc. recommends that 
“wheelies” not be attempted. 

 

Obstacles 

Obstacles and road hazards (such as potholes and broken pavement), can damage 
your chair and may cause a fall, tip-over, or loss of control. 
To avoid these risks: 
1.  Keep a lookout for danger—scan the area well ahead of your chair as you ride. 
2.  Make sure the floor area where you live and work are level and free of 

obstacles. 

3.  Remove or cover threshold strips between rooms. 
4.  Install a ramp at entry or exit doors. Make sure there is not a drop off at the 

bottom of the ramp. 

5.  To help correct your center of balance: 
 

a.  Lean your upper body FORWARD slightly as you go UP over an    

 obstacle. 
 

b.  Press your upper body BACKWARD as you go DOWN from a  

       

       

 

higher to a lower level. 

6.  Keep both of your hands on the handrims as you go over an obstacle. 
7. 

Never

 push or pull on an object, (such as furniture or a doorjamb), to propel 

your chair. 

If you fail to heed these warnings, damage to your chair, a fall, tip-over, or 
loss of control may occur and cause severe injury to the rider or others. 
 

Reaching or Leaning 

 

If you reach or lean, it will affect the center of balance of your chair. This may 

cause you to fall or tip over. When in doubt, ask for help or use a device to extend 
your reach.  
1. 

NEVER

 reach or lean if you must shift your weight sideways or rise up off the 

seat. 

2. 

NEVER

 reach or lean if you must move forward in your seat to do so. 

Always

 

keep your buttocks in contact with the backrest. 

3. 

NEVER

 reach with both hands, you may not be able to catch yourself to prevent 

a fall if the chair tips. 

4. 

DO NOT 

reach or lean over the top of the seat back. This may damage one or 

both backrest tubes and cause you to fall. 



!

 

Summary of Contents for CGX





































Reviews: