background image

21 

05/15/08 

          

Main Frame 

 

Anti-Tip Device 

 

Flip-up, removable anti-tip levers come standard on the 
Freedom 

CGX™

.

 

 
The anti-tip levers are preset at the factory. The anti-tips 
may be adjusted vertically (see “Anti-Tip Adjustment”, 
page 27). They can also be flipped up out of the way or 
removed. 
 

To flip the anti-tip levers up

, push in on the button 

shown at left. Rotate the lever inward and upward. The 
lever will snap into place in the upward position. 
Reverse procedure to place the anti-tips in the lowered 
position for use. 
 

To remove the anti-tip levers

, push in on the button at 

the top of the bend and pull backward. The anti-tip will 
slide free of the frame. 

 

Warning: Under normal use, anti-tip devices will 
prevent the wheelchair from tipping over backward. 
Anti-tip devices are to stay on the chair, in the lower 
position shown, when in use and should not be 
altered or disabled. 
 
 
 
 
 

 
Wheels and Tires 

 

The 

 

Freedom 

CGX™ 

 

wheelchair offers the following 

tire options: 
 
12” Semi Pneumatic Mag Wheels  
18” Pneumatic Mag Wheels  
 
Wheels may be removed from the chair by releasing the 
quick release axles. (See quick release axles—page 23) 
 

Check pneumatic tires weekly for proper inflation level 
listed on the tire sidewall. For wheel lock effectiveness, 
proper tire inflation must be maintained. 

 
No-flat inserts are available for the pneumatic mag 
wheels. 

 

Summary of Contents for CGX





































Reviews: