background image

 

FREEDOM DESIGNS, INC

.           

2241 Madera Rd.           Simi Valley, CA. 93065          800-331-8551          Fax 888-582-1509 

 

www.freedomdesigns.com 

General Warnings 

Warnings & Caution 

statements included in this manual describe conditions and unsafe 

practices which might result in bodily injury or property damage. Read this entire manual before 
assembly or operation of this wheelchair. If you do not understand any of the instructions in this 
manual, call your authorized Freedom Designs, Inc. dealer. Note: Where they apply, you will also 
find “Warnings” in other sections of this manual. Heed all warnings in this section.  

If you fail to heed these warnings, damage to your chair, a fall, tip-over, or loss of control 
may occur and cause severe injury to the rider or others

 

The 

weight limit 

for the Freedom 

CGX

 ™

 

is a 200 lb. person. If the person ex-

ceeds the weight limit, damage to your chair, a fall, tip-over or loss of control may 
cause severe injury to the rider or others.  

 

Every wheelchair is different. 

Become familiar with your chair before you 

begin riding. Start slowly, with easy, smooth strokes. Be careful not to use too 
much force, which might result in tipping over, damage to your chair, a fall, or loss 
of control, which may occur and cause severe injury to the rider or others. 
 

Reduction of Risk of an Accident: 

1. 

BEFORE

 riding, you should be trained in the safe use of this chair by your 

health care advisor. 

2.  Practice bending, reaching and transfers until you know the limit of your ability. 

In order to avoid tipping over, have someone help you, until you know what 
can cause a fall. 

3.  Be aware that you must develop your own methods for safe use best suited to 

your level of function and ability. 

4. 

NEVER

 try a new maneuver on your own until you are sure you can do it 

safely. 

5.  Get to know the areas where you plan to use your chair. Look for hazards and 

learn how to avoid them. 

If you fail to heed these warnings, damage to your chair, a fall, tip-over, or 
loss of control may occur and cause severe injury to the rider or others. 
 

Safety Checklist 

Before each use of your chair: 
1.  Make sure the chair rolls easily and that all parts work smoothly. Check for 

noise, vibration, or a change in ease of use. (They may indicate low tire pres-
sure, loose fasteners, or damage to your chair). 

2.  Repair any problems. Consult your Freedom Designs, Inc. authorized dealer 

for help in finding or correcting the problem. 

3.  Check to see that both quick-release axles are locked. When locked, the axle 

button will “pop out” fully. If not locked, the wheel may come off and cause you 
to fall. 

If you fail to heed these warnings, damage to your chair, a fall, tip-over, or 
loss of control may occur and cause severe injury to the rider or others.
 

 

Adjustments 

1.  If you modify or adjust this chair, it may increase the risk of a tip-over UNLESS 

you make other changes as well. 

2.  Before any adjustments or modifications are made to your chair, consult your 

authorized Freedom Designs, Inc. dealer. 

3.  Unauthorized modifications or use of parts not supplied or approved by Free-

dom Designs, Inc. may damage the chair structure. This will void the warranty 
and may cause a safety hazard. 



!

 

Summary of Contents for CGX





































Reviews: