Frecon FR200H, Manual

Page: 19 / 32

FR200H Special Purpose Inverters for Multi-pumps Constant Pressure Water Supply
- 19 -
2: Switched by terminal
F13.15
PID parameter
switchover
deviation 1
0.0
～
100.0% 20.0% ×
F13.16
PID parameter
switchover
deviation 2
0.0 ～ 100.0%
80.0% ×
F13.17 PID offset limit 0.0
～
100.0% 0.0% ×
F13.18 PID integral property
Unit's digit (Whether to stop
integral operation when the
output reaches the limit)
00 ×
0: Continue integral operation
1: Stop integral operation
Ten's digit (Integral separated)
0: Invalid
1: Valid
F13.19 PID differential limit 0.0
～
100.0% 0.5% ×
F13.20 PID initial value
0.0 ～ 100.0%
0.0% ×
F13.21
Holding time of PID
initial value
0.0
～
6000.0s 0.0s ×
F13.22
PID output frequency
upper limit
PID output frequency lower
limit
～ 100.0% （ 100.0%
corresponds to maximum
frequency
）
100.0% ×
F13.23
PID output frequency
lower limit
–100.0% ～ PID output frequency
upper limit
0.0% ×
F13.24
Detection value of
PID feedback loss
0.0
～
100.0%
0.0%: Not judging feedback loss
0.0% ×
F13.25
Detection time of
PID feedback loss
0.0
～
30.0s 1.0s ×
F13.26 PID operation at stop
Uinit’s digit:PID operation
0: No PID operation at stop
1: PID operation at stop
000 ×
Ten’s digit:Output limit
0: Do not limit
1: limit
Hundred’s digit:PID digital given
by UP/DOWN
0: Clear to zero when power off
1: Preserve whenpower off
F13.27
UP/DOWN speed of PID
digital given
0.0~100% (0.0% valid) 0.0% △
Group F14: Swing Frequency, Fixed Length ,Wakeup and Count
F14.10 Wakeup frequency
Dormant frequency (F14.12)
～
Fmax
0.00Hz △
F14.11 Wakeup delay time 0.0
～
6000.0s 0.0s △
F14.12 Dormant frequency 0.00 ～ Wakeup frequency 0.00Hz
△
F14.13 Dormant delay time 0.0
～
6000.0s 0.0s
△
F14.14 Wakeup Mode Selection
0: frequency wakeup
0 ×
1: pressure wakeup
F14.15
Dormant Mode
Selection
0: frequency dormant
0 ×
1: pressure dormant
F14.16
Pressure Feedback
Source
0: AI1
0 × 1: AI2
2: DI7/HI Pulse Input